2010 Infiniti EX35 Owner's Manual - Page 334

CRUISE CONTROL PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the dot matrix liquid crystal display will then blink to warn the driver. ● If the engine coolant temperature becomes excessively high, the cruise control system will be canceled automatically. ● If the SET indicator blinks, turn the cruise control main switch off and have the system checked by your INFINITI retailer. ● The SET indicator may sometimes blink when the cruise control main switch is turned ON while pushing the RESUME/ACCELERATE, SET/COAST or CANCEL switch. To properly set the cruise control system, perform the steps below in the order indicated. SSD0600 ● on slippery roads (rain, snow, ice, etc.) ● in very windy areas Doing so could cause a loss of vehicle control and result in an accident. 1. RESUME/ACCELERATE switch 2. SET/COAST switch 3. CANCEL switch 4. MAIN (ON·OFF) switch WARNING Do not use the cruise control when driving under the following conditions: ● when it is not possible to keep the vehicle at a set speed ● in heavy traffic or in traffic that varies in speed ● on winding or hilly roads CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator will come on. To set cruising speed, accelerate your vehicle to the desired speed, push the SET/COAST switch and release it. (The CRUISE SET indicator will Starting and driving 5-25