2010 Infiniti EX35 Owner's Manual - Page 46

7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. SSS0638 SSS0648 Front-facing - step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm) from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. Rear-facing (webbing-mounted) - step 2 Rear-facing Follow these steps to install a rear-facing child restraint using LATCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. Safety - Seats, seat belts and supplemental restraint system 1-27