2010 Infiniti EX35 Owner's Manual - Page 213
2010 Infiniti EX35 Manual
Page 213 highlights
● To cancel the separate temperature setting, push the "DUAL" button, the indicator light turns off, and the driver's side temperature setting will be applied to both the driver's and front passenger's sides. ● Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature not to be controlled properly. ● If the windows fog up, use dehumidified heating instead of the A/C off heating. Dehumidified defrosting/defogging : 1. Push the " " button. (The indicator light will illuminate.) 2. Turn the temperature control dial to set the desired temperature. ● To remove frost from the outside surface of the windshield quickly, set the temperature control and fan speed control to their maximum position. ● After the windshield is cleared, push the "AUTO" button to set to the automatic mode. " button is pushed, the ● When the " air conditioner will automatically turn on when the outside air temperature is above 23°F ( 5°C) to defog the windshield. The air recirculation mode will automatically turn off. The outside air circulation mode will be selected to improve the defogging performance. Air flow control : Push the "MODE" button to change the air flow mode. : Air flows from the center and side ventilators. : Air flows from the center and side ventilators, and foot outlets. : Air flows mainly from the foot outlets. : Air flows from the defogger and foot outlets. Temperature control : Turn the temperature control dial to set the desired temperature. ● The temperature can be set within the following range. - For U.S.: 60 to 90°F - For Canada: 18 to 32°C Air recirculation : Push the intake air control button to recirculate interior air inside the vehicle. The indicator light " side will illuminate. on the " The air recirculation mode cannot be activated when the air conditioner is in the front defrost". ing mode " Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the "OFF" button. Fan speed control : Push the fan speed control button " increase the fan speed. Push the fan speed control button " decrease the fan speed. " to " to Push the "AUTO" button to change the fan speed to the automatic mode. 4-48 Monitor, climate, audio, phone and voice recognition systems