2010 Infiniti EX35 Owner's Manual - Page 335

come on in the instrument panel.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. ● To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. ● The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. To cancel the preset speed, follow any of these methods: a) Push the CANCEL button. The SET indicator will go out. b) Tap the brake pedal. The SET indicator will go out. c) Move the selector lever to the N (Neutral) position. The SET indicator will go out. d) Turn the MAIN switch off. Both the CRUISE indicator and SET indicator will go out. ● If you depress the brake pedal while pushing the RESUME/ACCELERATE or SET/COAST switch and reset at the cruising speed, the cruise control will disengage. Turn the MAIN switch off once and then turn it on again. ● The cruise control will automatically cancel if the vehicle slows more than 8 MPH (12 km/h) below the set speed. ● If you move the selector lever to the N (Neutral) position, the cruise control will be canceled. To reset at a faster cruising speed, use one of the following methods: ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/COAST switch. ● Push and hold the RESUME/ACCELERATE switch. When the vehicle attains the speed you desire, release the switch. ● Push, then quickly release the RESUME/ACCELERATE switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h). To reset at a slower cruising speed, use one of the following methods: ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/COAST switch and release it. ● Push and hold the SET/COAST switch. Release the switch when the vehicle slows down to the desired speed. ● Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the RESUME/ACCELERATE switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h). 5-26 Starting and driving