2010 Infiniti QX56 Owner's Manual - Page 138

To fully close the moonroof, push the switch toward the close position 4 . To open or close the moonroof part way, push the switch in any direction 5 while the moonroof is sliding open or closed to stop it in the desired position. Auto reverse function (when closing or tilting down the moonroof) The auto reverse function can be activated when the moonroof is closed or tilted down by automatic operation when the ignition switch is placed in the ON position or for about 45 seconds after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will immediately tilt up. If the auto reverse function malfunctions and repeats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually. Make sure nothing is caught in the moonroof. Tilting the moonroof To tilt the moonroof up, push the tilt switch toward the up position 1 . When the moonroof is open, it will automatically close and then tilt up. To tilt the moonroof down, push the tilt switch toward the down position 2 . WARNING ● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. ● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing. Restarting the moonroof sliding switch The sliding switch will become inoperable after the battery terminal is disconnected, the electrical supply interrupted and/or some abnormality detected. Use the following reset procedure to return moonroof operation to normal. 1. If the moonroof lid is open, push the tilting switch repeatedly toward the down position 2 to fully close the lid. 2. Push and hold the tilting switch for more than 2 seconds toward the down position 2 to reestablish the lid's home position. The moonroof should now operate normally. WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the moonroof. When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. CAUTION ● Remove water drops, snow, ice or sand from the moonroof before opening. ● Do not place heavy objects on the moonroof or surrounding area. Instruments and controls 2-51