2010 Infiniti QX56 Owner's Manual - Page 313

How to change the set vehicle speed To cancel the preset speed, use any of these methods: ● Push the CANCEL switch. The set vehicle speed indicator will go out. ● Tap the brake pedal. The set vehicle speed indicator will go out. ● Turn the ON/OFF switch off. Both the ON/OFF switch indicator and set vehicle speed indicator will go out. WSD0219 To reset at a slower cruising speed, use one of the following methods: ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. ● Push and hold the COAST/SET switch. The set vehicle speed will decrease by approximately 5 MPH (5 km/h for Canada). ● Push, then quickly release the COAST/SET switch. Each time you do this, the set speed will decrease by approximately 1 MPH (1 km/h for Canada). To resume the preset speed, push and release the ACCEL/RES switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h). To reset at a faster cruising speed, use one of the following methods: ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. ● Push and hold the ACCEL/RES switch. The set vehicle speed will increase by approximately 5 MPH (5 km/h for Canada). ● Push, then quickly release the ACCEL/RES switch. Each time you do this, the set speed will increase by approximately 1 MPH (1 km/h for Canada). When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed. The vehicle detect indicator will turn off when the area ahead of the vehicle is open. When the pedal is released, the vehicle will return to the previously set speed. The CRUISE indicator light will appear on the vehicle information display. Although your vehicle may be at the set vehicle speed based on ICC system control, depress the accelerator pedal when it is necessary to accelerate your vehicle rapidly. 5-30 Starting and driving