2010 Infiniti QX56 Owner's Manual - Page 311

● When the selector lever is not in the D (Drive), 4, 3, 2, or 1 position. ● While the vehicle is being braked by the driver. ● When pressing the ACCEL/RES switch without there being a set speed in memory. ● When the windshield wipers are operating. ● When the parking brake is applied. ● When the Vehicle Dynamic Control (VDC) system is switched off. WSD0207 WSD0217 To set cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switch and release it. (Vehicle ahead detection indicator, set distance indicator and set vehicle speed indicator come on.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. The CRUISE indicator light in the vehicle information display remains on. The Intelligent Cruise Control system cannot be set under the following conditions even if the COAST/SET switch is pushed. ● When traveling outside the 25 to 89 MPH (40 to 144 km/h) speed range. System set display with vehicle ahead 5-28 Starting and driving