2010 Infiniti QX56 Owner's Manual - Page 35

● Disconnect and secure the center seat belt and tongues into the retractor base. See "Stowing the 3rd row center seat belt" later in this section. - Always reconnect the center seat belt when the seat is returned to the upright position ● Make sure that there are no objects on the seatback cushion. CAUTION LRS0636 4 LRS0792 Make sure the seat(s) is returned to the full upright position before a passenger sits in the seat(s). When folding or returning the seat(s) to the upright position, to avoid injury to yourself and others: ● Make sure that the seat path is clear before moving the seat. ● Be careful not to allow hands or feet to get caught or pinched in the seat. The carpet panel flap provides a level cargo floor when the 3rd row seats are also folded flat. 3RD ROW POWER FOLDING SEATS The 3rd row power folding seat controls are located behind the 2nd row seat (passenger's side) on the 3rd row cup holder console 1 . There are also controls located on the rear quarter trim panel behind the 3rd row seats (passenger's side) 2 . Before operating the 3rd row seats: ● Make sure the 2nd row seatback isn't reclined. ● Lower the 3rd row headrest to the full down position. 5. To return the outboard 2nd row bench seats to a seating position, reverse the process for the outboard seats. 6. To return the center seat to a seating position, lift up on the pull strap on the back of the seat base while lifting on the seatback. Then push the seat cushion back into place. Make sure to hold the seat belts above the seat cushion and properly raise the seatback to an upright position. Then push the seat cushion down into place. 1-18 Safety-Seats, seat belts and supplemental restraint system