2010 Infiniti QX56 Owner's Manual - Page 329

● Before placing the 4WD shift switch in the 4H position from 2WD or AUTO, ensure the vehicle speed is less than 62 MPH (100 km/h). Failure to do so can damage the 4WD system. ● Never shift the 4WD shift switch between 4LO and 4H while driving. ● Engine idling speed is high while warming up the engine. Be especially careful when starting or driving on slippery surfaces with the 4WD shift switch set in AUTO. drive the vehicle straight, accelerate or decelerate or move the vehicle in reverse, then shift the 4WD shift switch. ● If the 4WD warning light comes on, the 4WD indicator light goes out. CAUTION ● When the 4WD shift switch is turned to the AUTO position at low ambient temperatures, the 4WD shift indicator light may show 4H. If this happens, all four wheels are driven as torque distribution is in the 4H position. Be careful as the vehicle may become difficult to turn. When the vehicle is driven, the 4WD shift indicator light should change to AUTO. ● If the 4WD shift indicator light indication changes to 2WD when the 4WD shift switch is shifted to the AUTO or 4H position at low ambient temperatures, the 2WD mode may be being engaged due to malfunctioning drive system. If the indicator does not return to normal and the 4WD warning light comes on, have the system checked by the nearest INFINITI dealer. 4WD shift indicator light LSD0147 The 4WD shift indicator light is located in the vehicle information display. The light should turn off within 1 second after turning the ignition switch to the ON position. While the engine is running, the 4WD shift indicator light will illuminate the position selected by the 4WD shift switch. ● The 4WD shift indicator light may blink while shifting from one drive mode to the other. When the shifting is completed, the 4WD shift indicator light will come on. If the indicator light does not come on immediately, make sure the area around the vehicle is safe, and 5-46 Starting and driving