2010 Infiniti QX56 Owner's Manual - Page 318

● Do not impact the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause failure or malfunction. If the sensor is deformed due to an accident, contact an INFINITI dealer. ● Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction. ● Always confirm the setting in the Intelligent Cruise Control system display. ● Do not use the conventional (fixed speed) cruise control mode when driving under the following conditions: - When it is not possible to keep the vehicle at a set speed. - In heavy traffic or in traffic that varies in speed. - On winding or hilly roads. - On slippery roads (rain, snow, ice, etc.). - In very windy areas. Doing so could cause a loss of vehicle control and result in an accident. WSD0209 CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE This mode allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. WARNING ● In the conventional (fixed speed) cruise control mode, a warning chime does not sound to warn you if you are too close to the vehicle ahead, as neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is detected. ● Pay special attention to the distance between your vehicle and the vehicle ahead of you or a collision could occur. Conventional (fixed speed) cruise control mode display and switch The display is located within the vehicle information display. 1. Intelligent Cruise Control system display 2. ICC system warning light (Orange) The light comes on if there is a malfunction in the ICC system and is illuminated in the instrument panel. 3. CRUISE indicator light Indicates that the ON/OFF switch is ON and appears in the vehicle information display. Starting and driving 5-35