2010 Jeep Compass Owner Manual - Page 186

UNDERSTANDING YOUR INSTRUMENT PANEL 185 continuous chime will sound to alert you to turn the If the ABS light is on, the brake system should be serviced signals off. If either indicator flashes at a rapid rate, check as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the for a defective outside light bulb. ignition switch is turned to the ON position, have the 9. High Beam Indicator light inspected by an authorized dealer. This indicator shows that the high beam headlights are on. Push the multifunction lever forward 11. Seat Belt Reminder Light When the ignition switch is first turned ON, this to switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam. light will turn on for five to eight seconds as a bulb check. During the bulb check, if the driver's seat 10. Anti-Lock Brake (ABS) Light belt is unbuckled, a chime will sound. After the bulb This light monitors the Anti-Lock Brake System check or when driving, if the driver's seat belt remains (ABS). The light will turn on when the ignition unbuckled, the Seat Belt Reminder Light will illuminate switch is turned to the ON position and may and the chime will sound. Refer to "Occupant Restraints" stay on for as long as four seconds. in "Things To Know Before Starting Your Vehicle" for If the ABS light remains on or turns on while driving, it further information. indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. 4