2010 Jeep Compass Owner Manual - Page 206

UNDERSTANDING YOUR INSTRUMENT PANEL 205 button several times until you have displayed the Personal Settings (Customer-Programmable Features) menu. Once in the Personal Settings (Customer-Programmable Features) menu, press and release (less than one second) the EVIC button several times until "Compass Variance" is displayed. The "Compass Variance" message and the current variance zone number will be displayed. To change the zone, press and hold (longer than two seconds) the EVIC button to increment the variance one step. Repeat as necessary, with individual long (for at least 1 second) EVIC button presses for each increment, until the desired variance is achieved. To exit the Variance Programming, press the EVIC button with a short (less than one second) button press. Compass Calibration If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manually recalibrate the compass. To manually calibrate the compass: 1. Start the engine and leave the transmission in the PARK position. 2. Press and release the EVIC button (less than one second) several times until the EVIC displays the "Personal Settings (Customer-Programmable Features)" menu. 4 3. Once in the "Personal Settings (Customer-Programmable Features)" menu, press and release the EVIC NOTE: The factory default is Zone 8. During program- button (less than one second) several times until "Caliming, the zone value will wrap around from Zone 15 to brate Compass (Yes)" is displayed. Zone 1. 4. Press the EVIC button (more than one second), this will place the Compass in calibration mode. The CAL