2010 Jeep Compass Owner Manual - Page 31

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). • For vehicles not equipped with the EVIC, perform the following procedure: 1. Close all doors and place the key in the ignition switch. 2. Within 15 seconds, cycle the ignition switch between 6. The doors were not previously locked using the power LOCK and ON and then back to LOCK four times ending door lock switch or Remote Keyless Entry (RKE) up in the LOCK position (do not start the engine). transmitter. 3. Within 30 seconds, press the power door LOCK switch Automatic Door Locks Programming to lock the doors. The Automatic Door Locks feature can be enabled or 4. A single chime will indicate the completion of the disabled as follows: programming. • For vehicles equipped with the Electronic Vehicle 5. Repeat these steps if you want to return this feature to Information Center (EVIC), refer to "Electronic Vehicle its previous setting. Information Center (EVIC) - If Equipped/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information.