2010 Jeep Compass Owner Manual - Page 333

332 STARTING AND OPERATING every ignition cycle for each condition that it detects. In display to the vehicle's recommended cold placard presaddition, the EVIC will display a graphic of the pressure sure value. The system will automatically update, the graphic display of the pressure value(s) will stop flashvalue(s) with the low tire(s) flashing. ing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check TPMS Message The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime. The EVIC will display a "CHECK TPM SYSTEM" message for three seconds. This text message is then followed by a graphic display, with "- -" in place of Low Tire Pressure Display the pressure value(s) indicating which Tire Pressure Should a low tire condition occur on any of the four Monitoring Sensor(s) is not being received. active road tire(s), you should stop as soon as possible and inflate all tires that are flashing on the graphic