2010 Jeep Compass Owner Manual - Page 204

UNDERSTANDING YOUR INSTRUMENT PANEL 203 power outlets will remain active for up to 10 minutes after the ignition switch has been turned OFF. Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display until "OFF", "45 sec.", "5 min.", or "10 min." appears to make your selection. Illuminated Approach When this feature is selected the headlights will activate and remain on for up to 90 seconds when the doors are unlocked using the RKE transmitter. Press and hold the EVIC button when in this display until "OFF", "30 sec.", "60 sec.", or "90 sec." appears to make your selection. Hill Start Assist (HSA) - If Equipped When on is selected, the HSA system is active. Refer to "Electronic Brake Control System" in "Starting And Operating" for system function and operating information. To make your selection, press and release the EVIC button until "On" or "Off" appears. Display Units In The EVIC, odometer, and Uconnect™ gps system units can be changed between English and Metric. Press and hold the EVIC button when in this display until "ENGLISH" or "METRIC" appears to make your selection. Confirmation of Voice Commands - If Equipped When ON is selected, all voice commands from the Uconnect™ system are confirmed. Press and hold the EVIC button when in this display until "ON" or "OFF" appears to make your selection. Automatic Compass Calibration When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL" until the compass is calibrated. You may also calibrate the compass by completing one or more 360 degree turns (in an area free from 4