2010 Jeep Compass Owner Manual - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by press- Flash Lights With Remote Key Lock/Unlock ing the LOCK button on the RKE transmitter with the This feature will cause the turn signal lights to flash when ignition switch in the LOCK position and the key rethe doors are locked or unlocked with the RKE transmitmoved. ter. This feature can be turned on or turned off. To change 4. Repeat these steps if you want to return this feature to the current setting, proceed as follows: its previous setting. • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/Personal NOTE: Pressing the LOCK button on the RKE transmitSettings (Customer-Programmable Features)" in "Unter while you are in the vehicle will activate the Vehicle derstanding Your Instrument Panel" for further inforSecurity Alarm. Opening a door with the Vehicle Security mation. Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security • For vehicles not equipped with the EVIC, perform the Alarm. following steps: 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time.