2010 Jeep Compass Owner Manual - Page 32

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: Automatic Unlock Doors on Exit Programming • If you do not hear the chime it means that the system The Automatic Unlock Doors On Exit feature can be did not enter the programming mode and you will enabled or disabled as follows: need to repeat the procedure. • For vehicles equipped with the EVIC, refer to "Elec• Use the Automatic Door Locks feature in accordance tronic Vehicle Information Center (EVIC) - If with local laws. Equipped/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Automatic Unlock Doors on Exit Panel" for further information. The doors will unlock automatically if: • For vehicles not equipped with the EVIC, perform the 1. The Automatic Unlock Doors On Exit feature is enfollowing procedure: abled. 1. Close all doors and place the key in the ignition. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 2. Within 15 seconds, cycle the ignition switch between LOCK and ON and then back to LOCK four times ending 3. The transmission is in NEUTRAL or PARK. up in the LOCK position (do not start the engine). 4. The driver's door is opened. 3. Within 30 seconds, press the power door UNLOCK 5. The doors were not previously unlocked. switch to unlock the doors. 2