2006 Lexus GS 300 Owners Manual - Page 222

OCCUPANT RESTRAINT SYSTEMS DRIVING POSITION MEMORY SYSTEM A microcomputer will memorize the position of the driver's seat, and the positions of the tilt and telescopic steering, and outside rear view mirrors. Three different driving position profiles can be entered into the computer's memory. Recording a driving position in the computer's memory can only be done when the engine switch is selected in "IG−ON" mode and the selector lever is in the "P" position. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Setting the driving position Recalling the memorized position G16068 G16069 1. Adjust the driver's seat, tilt and telescopic steering and outside rear view mirrors to the desired position. 2. While pushing the "SET" button, push button "1","2" or "3" until the signal beeps. When you push button "1", "2" or "3", the driving position will be automatically adjusted to the position recorded for that button. 198