2006 Lexus GS 300 Owners Manual - Page 284
2006 Lexus GS 300 Manual
Page 284 highlights
AIR CONDITIONING SETTING OPERATION-manual control When one of the manual control switches is depressed while operating in automatic mode, the mode relevant to the depressed switch is set. Other conditions continue to be adjusted automatically. If manual air flow selection is desired- 3 4 Floor-Air flows mainly from the floor vents and rear vents. Floor/Windshield-Air flows mainly from the floor vents, windshield vents and rear vents. Take in the fresh air by selecting the OUTSIDE AIR mode with the air intake control button. If manual fan speed control is desired- G21006 G21007 The outlets from which air is delivered can be selected manually by touching the switch. The function of each mode is as follows: 1 2 Panel-Air flows mainly from the instrument panel vents and rear vents. Bi−level-Air flows from the floor vents, the instrument panel vents and rear vents. When you set the temperature selector setting at about the middle in automatic operation, warm air flows out of the floor vents and relatively low−temperature air flows out of the instrument panel vents and rear vents. 260 " 1 Fan speed at low 2 Fan speed at high The fan speed can be set to your desired speed by touching the appropriate air flow control switch. The higher the fan speed is, the more air is delivered. Pushing the "OFF" button turns off the fan. To remove exterior windshield frost and interior windshield fog, use the high speed setting.