2006 Lexus GS 300 Owners Manual - Page 763

INTERIOR EQUIPMENT Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Lexus dealer for assistance. INFORMATION The transmitting range from the HomeLinkr may differ from that from your hand−held garage transmitter. Reprogramming a button buttons cannot be erased, however, to Individual reprogram a single button, follow the procedure "Programming the HomeLinkR". HomeLinkR (c) Erasing the entire HomeLinkR memory (all three programs) INFORMATION Keep your hand−held garage transmitter even after programming. The hand−held garage transmitter will be required if reprogramming is necessary. G14061 (b) Operating the HomeLinkR To operate the HomeLinkR, press the appropriate HomeLinkR button to activate the programmed device. The HomeLinkR indicator light should come on. If the "Rolling Code" type program is registered, the HomeLinkr indicator light flashes several times, then remains on. The HomeLinkR continues to send the signal for up to 20 seconds as long as the button is pressed. To erase all previously programmed codes at one time, press and hold down the 2 outside buttons for 20 seconds until the indicator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLinkR memory. 117