2006 Lexus GS 300 Owners Manual - Page 908

AIR CONDITIONING (a) Climate control SETTING OPERATION − automatic control INFORMATION D This automatic control had additional functions as described below, when the "AUTO" button is pushed. The fan is stopped for a little while until warm air preparation, when outside temperature is low like a winter season in the "Floor", "Bi−level" or "Floor/Windshield" air flow mode. If quick removal for exterior frost, fog and inside fog on the windshield is desired, use the high fan speed setting after the "Windshield" air flow mode has been selected. The fan is stopped few seconds until cool air preparation, when outside temperature is high like a summer season in the "Panel" or "Bi−level" air flow mode. D The internal circulation may be applied for maximum cooling in the automatic operation mode, when outside temperature is high like a summer season. If fresh outside air is desired into the vehicle, push the air intake control button to select the OUTSIDE AIR mode. G21003 1. Push the "AUTO" button. An indicator light will illuminate to show that the automatic operation mode has been selected. Air flow quantity, switching of the diffusers, on−off of the air conditioning, and switching of the air intake between RECIRCULATED AIR and OUTSIDE AIR are automatically adjusted. The operation status is shown by each indicator. When one of the manual control buttons is depressed while operating in automatic mode, the mode relevant to the depressed button is set. Other conditions continue to be adjusted automatically. Push the "OFF" button to turn the air conditioning off. 262