2006 Lexus GS 300 Owners Manual - Page 850

OCCUPANT RESTRAINT SYSTEMS FRONT PASSENGER SEAT POSITION MEMORY SYSTEM A microcomputer can memorize the position of the front passenger seat. Three different seat position profiles can be entered into the computer's memory. Recording a seat position in the computer's memory can only be done when the engine switch is selected in "IG−ON" mode and the selector lever is in the "P" position. The beep sound means that the positions are recorded in the computer's memory. By repeating these two steps and pressing the remaining button, the seat position for another passenger can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set. To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2 above. Setting the front passenger seat position Recalling the memorized position G16123 G16124 1. Adjust the front passenger seat to the desired position. 2. While pushing the "SET" button, push button "1","2" or "3" until the signal beeps. When you push button "1", "2" or "3", the seat position will be automatically adjusted to the position recorded for that button. 204