2002 Mazda Millenia Owner's Manual - Page 160

J76Y.book Page 6 Wednesday, March 27, 2002 5:04 PM In Case of an Emergency Flat Tire M Removing a Flat Tire 1. Loosen the lug nuts by turning them counterclockwise one turn each, but don't remove any until the tire has been raised off the ground. NOTE Make sure the jack is well lubricated before using it. 1. Park on a level surface off the right-ofway and firmly set the parking brake. 2. Shift into Park (P) and turn off the engine. 3. Turn on the hazard warning flasher. 4. Have everyone get out of the vehicle and away from the vehicle and traffic. 5. Remove the jack, tool, and spare tire (page 7-3). 6. Block the wheel diagonally opposite the flat tire. When blocking a front wheel, place the block in front of the tire. When blocking a rear wheel, place the block behind the tire. 2. Place the jack under the jacking position closest to the tire being changed. Jacking position 7-6 Form No. 8Q47-EA-01F