2002 Mazda Millenia Owner's Manual - Page 189
2002 Mazda Millenia Manual
Page 189 highlights
J76Y.book Page 17 Wednesday, March 27, 2002 5:04 PM Maintenance and Care Owner Maintenance Miller Cycle Engine V6 DOHC Automatic Transaxle Fluid (ATF) M Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. The volume of fluid changes with the temperature. Fluid must be checked at idle without driving at normal operating temperature. The level must be kept between MIN and MAX. Visually examine the lines and hoses for leaks and damage. If new fluid is required frequently, consult an Authorized Mazda Dealer. CAUTION • Low fluid level causes transaxle slippage. Overfilling can cause foaming, loss of fluid, and transaxle malfunction. • Use specified fluid (page 10-4). A nonspecified fluid could result in transaxle malfunction and failure. 1. Park on a level surface and set the parking brake firmly. 2. Idle the engine about two minutes. Push down on the brake pedal. 3. Move the shift lever through all ranges and set it at P. 8-17 Form No. 8Q47-EA-01F