2002 Mazda Millenia Owner's Manual - Page 83

J76Y.book Page 9 Wednesday, March 27, 2002 5:04 PM Driving Your Mazda Starting and Driving WARNING Shifting from N or P: It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. If the engine is running faster than idle, don't shift from N or P into a driving gear. Shifting into N while Driving: Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury. Do not shift into N when driving the vehicle. D (Drive) D is the normal driving position. From a stop, the transaxle will automatically shift through a 4-gear sequence. S (Second) The S position is helpful when driving in slow-moving traffic and when climbing a hill. L (Low) Use the L position when pulling heavy loads and climbing steep grades. Shift patterns without hold mode: D S L 1st, 2nd, 3rd, 4th 1st, 2nd, 3rd 1st, 2nd WARNING Sudden Engine-Braking: Shifting down while driving on wet, snowy, or frozen roads, or driving at high speeds causes sudden engine braking, which is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. Do not cause sudden engine braking on slippery road surfaces or at high speeds. M Shift-Lock System The shift-lock system prevents shifting out of P unless the brake pedal is depressed. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine. 3. Push and hold the lock-release button. 4. Move the shift lever. NOTE • When the ignition switch is in the ACC or LOCK position, the transaxle cannot be shifted from P. • If the brake is pumped with the shift lever in P, a chattering near the shift lever may be heard. Don't worry, this is a normal sound. • To be sure the vehicle is in park, the ignition key cannot be removed unless the shift lever is in P. 5-9 Form No. 8Q47-EA-01F