2002 Mazda Millenia Owner's Manual - Page 207

J76Y.book Page 35 Wednesday, March 27, 2002 5:04 PM Maintenance and Care Owner Maintenance 6. Push in a new fuse of the same rating, and make sure it fits tightly. If it doesn't, have an Authorized Mazda Dealer install it. If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the RADIO circuit. 3. If a fuse is blown, replace it with a new one of the same rating. CAUTION Always replace a fuse with one of the same rating. Otherwise you may damage the electric system. Normal Blown If the headlights or other electrical components don't work and the fuses in the cabin are OK, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps: 1. Turn off the ignition switch and all other switches. 2. Remove the fuse block cover. When replacing the 120A fuse: 1. Turn off the ignition switch. 2. Remove the negative battery terminal. 3. Remove the A nuts. 4. Lift the fuse block and remove the B bolts. 120A fuse A A A B B Fuse block cover A 5. Replace the fuse with a new one of the same rating. 6. Install in the reverse order of removal. 8-35 Form No. 8Q47-EA-01F