2011 Mercedes SLK-Class Owner's Manual - Page 104
2011 Mercedes SLK-Class Manual
Page 104 highlights
171_AKB; 3; 60, en-US d2ureepe, 2009-05-11T16:00:23+02:00 - Seite 102 Version: 2.11.8.1 102 Control system simply a reminder with respect to the operation of certain systems. They do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety. Have all required maintenance and safety checks performed on the vehicle. Bring the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages. X Settings menu Introduction In the Settings menu there are two functions: The function To reset, push reset button for 3 seconds, with which you can reset all the settings to the original factory settings and a collection of submenus with which you can make individual settings for your vehicle. The following settings and submenus are available in the Settings menu: RResetting to factory settings (Y page 102) RSubmenus Controls in detail Press button V or U repeatedly until the Vehicle status message memory menu appears in the multifunction display. If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display. in the Settings menu (Y page 103) cluster submenu (Y page 103) submenu (Y page 105) submenu (Y page 105) submenu (Y page 108) RInstrument RTime/Date RLighting RVehicle submenu (Y page 108) : Number of recorded status messages X RConvenience Press button & or *. The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" (Y page 236). Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. Except for high-priority messages, the vehicle status message memory will be cleared when you switch off the ignition. Resetting to factory settings You can reset the settings of all submenus to the factory settings. For safety reasons, the function Headlamp Mode in the Lighting submenu cannot be reset while driving. X Press button V or U repeatedly until the Settings menu appears in the multifunction display.