2011 Mercedes SLK-Class Owner's Manual - Page 112

171_AKB; 3; 60, en-US d2ureepe, 2009-05-11T16:00:23+02:00 - Seite 110 Version: 2.11.8.1 110 Control system Resetting fuel consumption statistics X Controls in detail Press button U or V repeatedly until the message From Start appears in the multifunction display. X Press button & or * repeatedly until the reading that you want to reset appears in the multifunction display. X Press and hold the reset button . in the instrument cluster until the respective values are reset to 0. The fuel consumption statistics reset automatically to 0 after 99 999 miles or 9 999 hours, whichever occurs first. telephone call. If you choose to use the telephone while driving, please use the handsfree device and only use the telephone when weather, road and traffic conditions permit. Some jurisdictions prohibit the driver from using a mobile phone while driving a vehicle. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximately 14 m) every second. Distance to empty X Press button U or V repeatedly until the message From Start appears in the multifunction display. X Press button & or * repeatedly until the message Range: appears in the multifunction display. The calculated remaining driving range based on the current fuel tank level appears in the multifunction display. If only very little fuel is left in the tank, a vehicle at the fuel pump C appears instead of the remaining driving range. You can connect your telephone to the audio system (Y page 146) or to the COMAND system via Bluetooth®, see separate COMAND system operating instructions. X Switch on the audio system (Y page 117) or the COMAND system, see separate COMAND system operating instructions. X Press button U or V repeatedly until the Telephone menu appears in the multifunction display. One of the following messages will appear in the multifunction display: RNo Service: No network is available. RBluetooth Ready: The telephone has not been connected to the audio system or COMAND system via Bluetooth® yet. X Connect the telephone to the audio system or COMAND system via Bluetooth®. or name of the network provider (if available): The telephone has found a network and is ready for use. You can operate it using the control system. RReady Telephone menu G Warning! A driver's attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a Answering a call When your telephone is ready to receive calls, you can answer a call at any time. In the multifunction display you will then see the following message, or if available, the caller ID (number or name):