2011 Mercedes SLK-Class Owner's Manual - Page 237

171_AKB; 3; 60, en-US d2ureepe, 2009-05-11T16:00:23+02:00 - Seite 235 Version: 2.11.8.1 Where will I find ...? X 235 Turn the crank handle in the direction of arrow as far as it will go. X Operational position X Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X X Jack G Warning! Only use the jack supplied with your vehicle to lift the vehicle briefly for wheel changes. If you use the jack for any other purpose, you or others could be injured, as the jack is designed only for the purpose of changing a wheel. When using the jack, observe the safety notes in the "Mounting the spare wheel" section and the notes on the jack. X Fully collapse the jack. Fold in the crank handle (storage position). Spare wheel G Observe Safety notes, see page 273. The spare wheel is located in the space underneath the trunk floor. X Removing: Open the trunk (Y page 59). X Lift the trunk floor. Take the jack from the vehicle tool kit (Y page 234). X Remove retaining screw ; by turning it counterclockwise. X Remove spare wheel :. Storage position Z Practical hints Setting up: Tilt both plates upward :. X Fold the lower plate outward ;. X Guide the tabs of the lower plate all the way into the openings of base plate =. For information on where to place wheel chocks when changing a wheel, see "Lifting the vehicle" (Y page 277).