2011 Mercedes SLK-Class Owner's Manual - Page 108

171_AKB; 3; 60, en-US d2ureepe, 2009-05-11T16:00:23+02:00 - Seite 106 Version: 2.11.8.1 106 Control system The following functions are available: RSwitching RSwitching RSwitching RLicense RSide plate lamps daytime running lamp mode on or off (USA only) (Y page 106) locator lighting on or off (Y page 106) night security illumination (Headlamps delayed shut-off feature) on or off (Y page 107) interior lighting delayed shut-off on or off (Y page 107) marker lamps Controls in detail RSwitching Switching daytime running lamp mode on or off (USA only) X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Headlamp Mode appears in the multifunction display. The selection marker is on the current setting. For more information on the daytime running lamp mode, see (Y page 72). For safety reasons, resetting all the functions of all submenus to the factory settings while driving (Y page 102) will not deactivate the daytime running lamp mode. The following message appears in the multifunction display: Lighting Cannot be completely reset to factory settings while driving. Switching locator lighting on or off With the locator lighting feature activated and the exterior lamp switch in position Ã, the following lamps will come on during darkness when the vehicle is unlocked using button % on the SmartKey: RParking lamps RTail lamps plate lamps marker lamps fog lamps RLicense RSide RFront X Press button W or X to select manual operation (Manual) or daytime running lamp mode (Constant). With daytime running lamp mode switched on and the exterior lamp switch in position $ or Ã, the low-beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: RParking RTail lamps The locator lighting goes out when the driver's door is opened. If you do not open the driver's door after unlocking the vehicle with the SmartKey, the lamps will go out automatically after approximately 40 seconds. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Surround Lighting Function appears in the multifunction display. The selection marker is on the current setting. lamps