2011 Mercedes SLK-Class Owner's Manual - Page 273
2011 Mercedes SLK-Class Manual
Page 273 highlights
171_AKB; 3; 60, en-US d2ureepe, 2009-05-11T16:00:23+02:00 - Seite 271 Version: 2.11.8.1 Replacing wiper blades X 271 Gently press the new bulb into bulb socket =. X Place bulb socket = back into the housing and turn it clockwise until it engages. License plate lamps Front turn signal lamp bulb X X Parking and standing lamp bulb X Turn bulb socket ? with the bulb counterclockwise and remove it. X Pull the bulb out of bulb socket ?. X Gently press the new bulb into bulb socket ?. X Place bulb socket ? back into the housing and turn it clockwise until it engages. Replacing wiper blades Safety notes G Warning! Replacing bulbs for rear lamps Tail lamp unit Since replacing bulbs in the tail lamp unit is a technically highly demanding process, we recommend to have them replaced at an authorized Mercedes-Benz Center. For safety reasons, switch off the wipers and remove the SmartKey from the starter switch before replacing a wiper blade. Otherwise, the wiper motor could suddenly turn on and cause injury. G Warning! Wiper blades are components that are subject to wear and tear. Replace the wiper blades twice a year, preferably in the spring and fall. Otherwise the windshield will not be wiped properly. As a result, you may not be able to observe surrounding traffic conditions and could cause an accident. Z Practical hints Turn bulb socket ; with the bulb counterclockwise and remove it. X Gently press onto the bulb and turn it counterclockwise out of bulb socket ;. X Gently press the new bulb into bulb socket ; and turn it clockwise until it engages. X Place bulb socket ; back into the housing and turn it clockwise until it engages. X Switch off the ignition. Turn the exterior lamp switch to position $. X Open the trunk. X Loosen screws : of lamp cover to be removed. X Remove lamp cover ;. X Replace the bulb. X Reinstall lamp cover ;. X Retighten screws :.