2012 Nissan cube Owner's Manual - Page 110

INTERIOR LIGHTS If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. SIC4572 MAP LIGHTS (if so equipped) Operate the map light switch to turn the map light on or off. 1 : * 2 : * ON position OFF position 2-38 Instruments and controls