2012 Nissan cube Owner's Manual - Page 44

top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. SSS0967 SSS1039 Rear seats (except for Cargo Van models): 1. Position the top tether strap over the top of the seatback and under the head restraint. 2. Secure the tether strap to the tether anchor on the seat directly behind the child restraint. 3. Tighten the tether strap according to the manufacturer's instructions to remove any slack. For the best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturer's instructions. If you have any questions when installing a Front passenger seat (Cargo Van models): For the front passenger seat in Cargo Van models, install the top tether strap according to the following procedure. 1. Adjust the head restraint to its highest position. 2. Route the top tether strap between the head restraint and the top of the seatback. 3. Secure the tether strap to the tether anchor point on the floor behind the seat. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. For the best child restraint fit, see the child 1-26 Safety - Seats, seat belts and supplemental restraint system