2012 Nissan cube Owner's Manual - Page 213

PUSH-BUTTON IGNITION SWITCH (models with Intelligent Key system) KEY POSITIONS LOCK (0) The key can only be removed from the ignition switch at this position. WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.) If the engine stops while the vehicle is being driven, this could lead to a crash and serious injury. Before operating the push-button ignition switch, be sure to move the selector lever to the P (Park) position. OFF (1) The engine is turned off. The power supply is turned off. ACC (2) The electrical accessory power activates without the engine turned on. SSD0503 ON (3) The ignition system and the electrical accessory power activate without the engine turned on. MANUAL TRANSMISSION (MT) The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. To turn the ignition switch to the LOCK position from the ACC or ON position, turn the key to the OFF position, push the key in, then turn the key to the LOCK position. 1 in between the There is an OFF position * LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. START (4) The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position. CAUTION As soon as the engine has started, release the ignition switch immediately. Starting and driving 5-9