2012 Nissan cube Owner's Manual - Page 158

3. Push the temperature control , button to set the desired temperature. The temperature range is between 608F (188C) and 908F (328C). . Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly. . If the windows fog up, use dehumidified heating instead of the A/C off heating. Dehumidified defrosting/defogging: 1. Push the front defroster button. (The indicator light will illuminate.) 2. Turn the temperature control , button to set the desired temperature. . To remove moisture or fog on the front window quickly, set the temperature to the high temperature and the fan speed to their maximum level. . After the windshield is cleared, push the front defroster button again. (The indicator light will turn off.) . When the front defroster button is pushed, the air conditioner will automatically turn on to defog the windshield. The outside air circulation mode will be selected to improve the defogging performance. Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the OFF button. Fan speed control: Turn the fan speed control adjust the fan speed. , dial to illuminates, the flowing air is recirculated inside the vehicle. Outside air circulation: Push the outside air circulation button to change the air circulation mode. When the indicator light illuminates, the flowing air is drawn from outside the vehicle. Automatic air intake control: To set the automatic control mode, perform one of the following operations. When the outside air circulation mode is on, push and hold the outside air circulation button for more than 1.5 seconds. . When the air recirculation mode is on, push and hold the air recirculation button for more than 1.5 seconds. When setting the automatic control mode, both indicator lights will blink twice indicating that the system is in the automatic control mode. . Air flow control: Push the MODE button to change the air flow mode. - - - - Air flows from the center and side ventilators. Air flows from the center and side ventilators and foot outlets. Air flows mainly from the foot outlets. Air flows from the defroster outlets and foot outlets. Temperature control: Push the temperature control to set the desired temperature. , button The temperature range is between 608F (188C) and 908F (328C). Air recirculation: Push the air recirculation button to change the air circulation mode. When the indicator light 4-18 Center display, heater, air conditioner, audio and phone systems