2012 Nissan cube Owner's Manual - Page 157

3. Push the temperature control , button to set the desired temperature. The temperature range is between 608F (188C) and 908F (328C). 4. To set the automatic control mode, perform one of the following operations. . When the outside air circulation mode is on, push and hold the outside air circulation button for more than 1.5 seconds. . When the air recirculation mode is on, push and hold the air recirculation button for more than 1.5 seconds. When setting the automatic control mode, both indicator lights will blink twice indicating that the system is in the automatic control mode. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Heating (A/C off): 1. Push the AUTO button. (The AUTO indicator will be displayed.) 2. If the A/C indicator light illuminates, push the A/C button. (The A/C indicator light will turn off.) SAA2346 1 2 3 4 5 6 7 8 9 10 11 *: Front defroster button Display* Rear window defroster button (See "Rear window and outside mirror defroster switch" (P.2-24).) AUTO button Temperature control , button , button Fan speed control OFF button MODE button Air recirculation button button Outside air circulation A/C (Air Conditioner) button Temperature is displayed 8F (US) or 8C (Canada). AUTOMATIC AIR CONDITIONER Automatic operation (AUTO) The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed. To turn off the heater and air conditioner, push the OFF button. Cooling and dehumidified heating: 1. Push the AUTO button. (The AUTO indicator will be displayed.) 2. If the A/C indicator light does not illuminate, push the A/C button. (The A/C indicator light will illuminate.) Center display, heater, air conditioner, audio and phone systems 4-17