2012 Nissan cube Owner's Manual - Page 172

Balance to the desired level. Fade adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers. Once you have adjusted the sound quality to the desired level, push the MENU button repeatedly until the radio or CD display reappears (normal mode). Otherwise, the radio or CD display will automatically reappear after approximately 10 seconds. mode. 5. Push the TUNE or SEEK button to adjust the minutes. 6. Push the MENU button again to exit the clock mode. The display will return to the regular clock display after 5 seconds. FM-AM radio operation Radio (FM/AM) band select: Pushing the radio band select button will change the band as follows: AM ? FM1 ? FM2 ? AM When the radio band select button is pushed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the PWR button is pushed to ON. If another audio source is playing when the radio band select button is pushed, the audio source will automatically be turned off and the last radio station played will come on. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. SIC4146 Clock adjust: 1 until the CLOCK Push the MENU button * 2 or mode appears. Then push the TUNE * 3 button to select "CLK-ON" or "CLKSEEK * OFF" to turn the clock on or off. "CLK-ON" needs to be selected before adjusting the clock display. 1. Push the MENU button 2. display starts to flash. 1 . * 1 again. The clock Push the MENU button * 3 * 2 or SEEK 3. Push the TUNE * adjust the hours. button to 1 4. Push the MENU button * again. The display will switch to the minute adjustment 4-32 Center display, heater, air conditioner, audio and phone systems