2013 Nissan Juke Owner's Manual - Page 108

CLOCK (if so equipped) GUID-8EF3F7B9-ECF4-4984-877D-7948CE13B956 The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle's interior is warmed, or before you leave the vehicle, be sure to turn off the switch. The digital clock (in the audio unit) displays time when the ignition switch is in the ACC or ON position. The clock ON or OFF mode can be selected. For details of the digital clock in the INTEGRATED CONTROL SYSTEM, refer to "Clock Time Setting" (P.2-23). For details of the digital clock in the NAVIGATION SYSTEM, refer to "Clock" (P.4-7). If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. SIC2770 The seats are warmed by built-in heaters. The switches located on the center console can be operated independently of each other. 1. Start the engine. 2. Select heat range. 1 For high heat, push the HI (High) side of * the switch. 2 For low heat, push the LO (Low) side of * the switch. The indicator light in the switch illuminate when the heater is on. 3 * will 3. To turn off the heater, return the switch to the level position. Make sure the indicator light goes off. 2-40 Instruments and controls