2013 Nissan Juke Owner's Manual - Page 161

Bi-level heating: GUID-3448E018-0BC4-4D17-AD0E-3BB850F23C53 This mode directs cool air from the side and center vents and warm air from the foot outlets. When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pushed or the fan control dial is turned to off. . cooling. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Air conditioner operation GUID-6B0AC811-3583-46CD-A00A-10ACB2584EE9 The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication. Cooling: GUID-3448E018-0BC4-4D17-AD0E-3BB850F23C53 This mode is used to cool and dehumidify the air. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Dehumidified GUID-3448E018-0BC4-4D17-AD0E-3BB850F23C53 heating: This mode is used to heat and dehumidify the air. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Turn the temperature control dial to the desired position. Heating and defogging: GUID-3448E018-0BC4-4D17-AD0E-3BB850F23C53 This mode heats the interior and defogs the windows. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position. Dehumidified GUID-3448E018-0BC4-4D17-AD0E-3BB850F23C53 defogging: This mode is used to defog the windows and dehumidify the air. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position. . For quick cooling when the outside temperature is high, move the air intake lever to the position. Be sure to move the air intake lever to the position for normal 4. Turn the temperature control dial to the desired position. When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the Heater, air conditioner, audio and phone systems 4-15