2013 Nissan Juke Owner's Manual - Page 219

When the ignition switch cannot be turned to the LOCK position: 1. Move the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key. If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed. 1 There is an OFF position * between the LOCK and ACC positions, although it is not marked on the ignition switch. SSD0392 SSD0503 CONTINUOUSLY VARIABLE TRANSMISSION (CVT) GUID-A31ADAA1-0AF9-4171-B26A-9D64BB7CD00F The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. . When turning the ignition switch to the LOCK position, make sure that the selector lever is in the P (Park) position. When removing the key from the ignition switch, make sure that the selector lever is in the P (Park) position. MANUAL TRANSMISSION (MT) GUID-30599C43-2D5E-4054-92D8-1800F99D4CA8 The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. To turn the ignition switch to the LOCK position from the ACC or ON position, turn the key to the OFF position, push the key in, then turn the key to the LOCK position. 1 in between the There is an OFF position * LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. . Starting and driving 5-11