2015 Nissan Juke Owner's Manual - Page 178

Fan speed control: Turn the fan speed control increase the fan speed. dial clockwise to 4. Turn the temperature control dial to the desired position between the middle and the hot (right) position. Ventilation: This mode directs outside air to the side and center ventilators. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the . Turn the fan speed control dial counterclockwise to decrease the fan speed. A/C (Air Conditioner) operation: Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates. Temperature control: Turn the temperature control dial to set the desired temperature. Turn the dial between the middle and the right position to select the hot temperature. Turn the dial between the middle and the left position to select the cool temperature. When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. Bi-level heating: This mode directs cool air from the side and center vents and warm air from the foot outlets. When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Defrosting or defogging: This mode directs the air to the defroster outlets to defrost/defog the windows. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Heater operation Heating: This mode is used to direct heated air to the foot outlets. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Turn the temperature control dial to the desired position. Heating and defogging: This mode heats the interior and defogs the windows. 1. Move the air intake lever to the position. 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Turn the temperature control dial to the desired position between the middle and the hot (right) position. . To remove frost from the outside surface of the windshield quickly, turn the temperature control dial to the maximum hot position and the fan speed control dial to the maximum position. Heater, air conditioner, audio and phone systems 4-27