2015 Nissan Juke Owner's Manual - Page 181

. . . . To remove moisture or fog on the front window quickly, set the temperature to the high temperature and the fan speed to their maximum level. After the windshield is cleared, push the front defroster button again. (The indicator light will turn off.) When the front defroster button is pushed, the air conditioner will automatically turn on to defog the windshield. The outside air circulation mode will be selected to improve the defogging performance. When the position is selected, the air recirculation mode cannot be turned on to prevent the windows from being fogged up. Fan speed control: Turn the fan speed control fan speed. dial to adjust the Air flow control: Push the air flow control buttons to change the air flow mode: - - - - Air flows from the center and side ventilators. Air flows from the center and side ventilators and foot outlets. Air flows mainly from the foot outlets. Air flows from the defroster outlets and foot outlets. Outside air circulation: Push the air intake button to change the air circulation mode. When the indicator light illuminates, the flowing air is drawn from outside the vehicle. Automatic air intake control: Push and hold the outside air circulation " " /air recirculation " " button for more than 1.5 seconds to set the automatic control between the outside air circulation and air recirculation modes. When the " " or " " position is selected, the air recirculation mode does not activate. When setting the automatic control mode, the indicator lights " " and " " will blink twice indicating that the system is in the automatic control mode. Temperature control: Turn the temperature control dial to set the preferred temperature. The temperature range is between 608F (188C) and 908F (328C). Air recirculation: Push the air intake button to change the air circulation mode. When the indicator light illuminates, the flowing air is recirculated inside the vehicle. . When the or position is selected, the air recirculation mode cannot be turned on to prevent the windows from being fogged up. Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the OFF button. If the Drive Mode is indicated on the screen, push the CLIMATE button to change to the Climate Control Mode, then push the OFF button. 4-30 Heater, air conditioner, audio and phone systems