2015 Nissan Juke Owner's Manual - Page 366
2015 Nissan Juke Manual
Page 366 highlights
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag...1. License plate bracket J-nut 6 2 Screw 6 2 Screw grommet 6 2 Park the vehicle on flat, level ground. Make sure the side end surface of the license plate bracket is aligned with the B . bumper * 3. Mark the center of the holes tip pen. C * A as illustrated. 2. Locate the center position * with a felt- 4. Carefully drill the two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 5. Insert grommets into the hole on the fascia. JVT0347X 6. Insert a flat-blade screwdriver into the grommet hole to add a 908 turn onto the D . part * 7. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. Technical and consumer information 9-13