2015 Nissan Juke Owner's Manual - Page 92
2015 Nissan Juke Manual
Page 92 highlights
fastened when the front passenger's seat is occupied. For about 5 seconds after the ignition switch is in the ON position, the system does not activate the warning light for the front passenger. See "Seat belts" (P.1-10) for precautions on seat belt usage. not function properly. For additional information, see "Supplemental restraint system" (P.1-38). WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible. the fact that the VDC system's fail-safe mode is operating, for example the VDC system may not be functioning properly. Have the system checked by a NISSAN dealer. If a malfunction occurs in the system, the VDC system function will be canceled but the vehicle is still driveable. For additional information, see "Vehicle Dynamic Control (VDC) system" (P.5-37) of this manual. Supplemental air bag warning light After placing the ignition switch in the ON position, the supplemental air bag warning light will illuminate. The supplemental air bag warning light will turn off after about 7 seconds if the supplemental front air bag and supplemental side air bag, curtain side-impact air bag systems and/or pretensioner seat belt are operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing and your vehicle must be taken to your nearest NISSAN dealer. . The supplemental air bag warning light remains on after approximately 7 seconds. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not illuminate at all. Unless checked and repaired, the Supplemental Restraint Systems and/or the pretensioners may INDICATOR LIGHTS All-Wheel Drive (AWD) indicator light (AWD model) When the ignition switch is in the "ON" position, the All-Wheel Drive (AWD) indicator light illuminates and then turns off. When selecting AWD mode while the engine is running, the AWD indicator light illuminates. (See "All-Wheel Drive (AWD)" (P.5-29).) Vehicle Dynamic Control (VDC) warning light When the ignition switch is in the "ON" position, the Vehicle Dynamic Control (VDC) warning light illuminates and then turns off. The light will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting the driver that the vehicle is nearing its traction limits. The road surface may be slippery. If the VDC warning light illuminates while the VDC system is on, this light alerts the driver to All-Wheel Drive (AWD-V) indicator light (AWD model) When selecting AWD-V mode while the engine is running, the AWD-V indicator light illuminates. (See "All-Wheel Drive (AWD)" (P.5-29).) Instruments and controls 2-17