2007 Subaru Outback Owner's Manual - Page 30

Seat, seatbelt and SRS airbags 1-5 Retrieval of seat position Never retrieve the seat position while driving to avoid the possibility of loss of vehicle control and of personal injury. Perform the seat position retrieval before driving. Be sure to confirm that the selector lever position is in the "P" position. Do not drive until the retrieval of the seat position is complete. Be sure to press the correct button to retrieve your registered seat position. If the seat position is not optimum for you, it may adversely affect your driving and may reduce the effectiveness of the seatbelt. That could result in an accident involving serious injury or death. When retrieving a registered seat position, make sure the hands, feet and possessions of rear seat passengers are clear of the seat adjusting mechanism. When any trouble or a malfunction occurs during the retrieval of the seat position, stop the retrieval of the seat position using any of the control switches for manual adjustment, seat memory set button, seat memory registered button 1 or 2. NOTE If a new position is registered for the same button, the previous seat position is deleted. Even if the battery is disconnected, the registered seat position is not deleted. Head restraint adjustment 1 2 SET 100805 1. With the transmission selector lever in the "P" position, press the desired button "1" or "2". 2. The chime sounds once and the seat moves to the registered position. 3. When the seat moves to the registered position, the chime sounds twice. 100355 To raise the head restraint, pull it up. To lower it, push the head restraint down while pressing the release button on the top of the seatback. The head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant's ears. - CONTINUED -