2007 Subaru Outback Owner's Manual - Page 363

11-46 Maintenance and service Rear combination lights Backup light/Tail light 1 2 B00349 B00347 1. Remove the two covers by inserting the tip of a flat-head screwdriver. 1) Brake/tail light 2) Rear turn signal light B00350 3. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 4. Remove the bulb from the socket by pushing it and turning counterclockwise. Install a new bulb. 5. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 6. Close the cover and latch the lock. 7. Reinstall the rear combination light assembly. 1. Use a flat-head screwdriver to remove the light cover from the rear gate trim. 1 2 B00348 B00351 2. Using a Phillips screwdriver, remove the upper and lower screws. 1) Tail light 2) Backup light