2012 Subaru Tribeca Owner's Manual - Page 105

Initial Settings Enter your four-digit password using the joystick, then press the "ENTER" button. The display will change to the "RESTRICTION LEVEL" screen. Select a restriction level number (1 - 8) with the joystick, then press the "ENTER" button. The switch color of the set number changes from white to gray. To return to the SETUP MENU screen, highlight the " " switch with the joystick, and then press the "ENTER" button. NOTE y No default has been set for the password. The "PERSONAL CODE" screen will show " ". Register your password as instructed in "Password registration" below. y Entry of a wrong password results in an " INCORRECT CODE" message. If this message appears, you cannot continue the viewer restriction setting operation unless you re-enter the correct password. (Refer to Page 54.) y If you forget your password, return the system to the state before registering the password. The method for doing this is described in NOTE of "Password registration" below. Next, register a new password. „ Password registration Use this method to register your password, which is necessary when setting the viewer restriction level. With a DVD video disc loaded in the player, access the SETUP MENU screen. Highlight the "PARENTAL LOCK" with the remote control joystick, then press the "ENTER" button. The display will change to the "PERSONAL CODE" screen. Enter a numerical four-digit password using the joystick, then press the "ENTER" button. NOTE If necessary, you can return the system to the state before registration of the password by doing the following: On the "PERSONAL CODE" screen, highlight the first digit position with the joystick, and then click the " " mark end of the joystick 10 times. The screen will show " ", indicating that no password has been set. 49