2012 Subaru Tribeca Owner's Manual - Page 210
2012 Subaru Tribeca Manual
Page 210 highlights
Seat, seatbelt and SRS airbags 1-23 WARNING Fastening the seatbelt with the webbing twisted can increase the risk or severity of injury in an accident. When fastening the belt after it is pulled out from the retractor, especially when inserting the connector's tongue plate into the mating buckle (on right-hand side), always check that the webbing is not twisted. belt (with the connector 's tongue plate not fastened to the connector's buckle on the right-hand side), it cannot properly restrain the wearer in position in an accident, possibly resulting in serious injury or death. 2. Pull out the seatbelt slowly from the overhead retractor. Center seatbelt is stowed in the recess of the ceiling. 1. Remove the connector (tongue) plate from the slot located at the front of the recess by pulling the connector (tongue) plate rearward. WARNING Be sure to fasten both tongue plates to the respective buckles. If the seatbelt is used only as a shoulder 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click - CONTINUED -