2012 Subaru Tribeca Owner's Manual - Page 208

Seat, seatbelt and SRS airbags 1-21 ! Second-row seatbelts - excluding center seatbelt 1. Sit well back in the seat. 2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving a strong pull on it, then pull it out slowly again. 4. To make the lap part tight, pull up on the shoulder belt. 5. Place the lap belt as low as possible on your hips, not on your waist. ! Adjusting the shoulder belt anchor height (second-row seats) The shoulder belt anchor height should be adjusted to the position best suited for the passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. To raise: Slide the anchor up. To lower: Push the release button and slide the anchor down. Pull down on the anchor to make sure that it is locked in place. 3. Insert the tongue plate into the buckle until you hear a click. - CONTINUED -