2012 Subaru Tribeca Owner's Manual - Page 221

1-34 NOTE Seat, seatbelt and SRS airbags When the child restraint system is no longer in use, remove it and restore the ELR mode of the retractor. That mode is restored by retracting the seatbelt fully. ! Installing forward facing child restraint 1. When installing on the second-row outboard seat, remove the head restraint. When installing on the second-row center seat, raise the head restraint. When installing on the third-row seat, lower the head restraint. Second-row center seat 1) Head restraint 2) Release button Second-row outboard seat 1) Head restraint 2) Release button Third-row seat 1) Head restraint 2) Lowering strap 2. Slide the seat or seat pair to its rearmost position. 3. Adjust the seatback to the upright position. 4. Place the child restraint system in the seating position. 5. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its manufacturer. 6. Insert the tongue plate into the buckle until you hear a click.